EdgeLink100 - BATM Advanced Communications Ltd.

Home | Contact Us | International [change] Log In | Register

HOME

ABOUT

SOLUTIONS

Products

EdgeLink100

Requires login
New user? REGISTER HERE

Username
Password

Forgot your password?

Need more INFORMATION?

Contact us and we will be happy to assist you
Name
E-mail
Phone
Country
Comments

Telco's RoHS compliance statement

Ethernet/MPLS Aggregation Ethernet Demarcation Multi-Service Access FTTx Media Converters Wavelength Multiplexing TDM NMS/EMS Rugged Ethernet

ShareThis

EdgeLink100

DS3 Multiplexer

Enlarge

Description Documentation Software

EdgeLink100 is the industry's smallest, most cost-effective DS3 multiplexer available. Its compact, plug-and-play architecture enables service providers to turn up T1s fast, saving installation time and costs as
well as valuable real estate. Deployed at every edge of the network from the core to the CPE Edge.

Cuts service deployment costs

Compact – only 1 RU – saves valuable real estate
Plug-and-play architecture – fast and easy to install
Remotely manageable
TFTP Software Downloadable – in-service upgrades
Redundant architecture – 1:1

Data Sheets
- EL100 Data Sheet (English, A4) (262.21 KB)
- EL100 Data Sheet (English, US) (179.08 KB)

Installation Guides
- EdgeLink100 Installation Guide (407.71 KB)

User Guides
- Non Trouble Procedures (146.61 KB)
  - Install an ACX091 / ACX095G1 Cage (NTP-002) (42.11 KB)
  - Acceptance Unit-Level Test an EdgeLink100 Multiplexer (NTP-003) (107.54 KB)
  - Acceptance End-to-End System-Level Test an EdgeLink100 Multiplexer (NTP-004) (41.56 KB)
- Trouble Analysis Procedures (101.29 KB)
  - Clear DS1 Trouble (TAP-101) (28.83 KB)
  - Clear Power Supply Trouble (TAP-102) (37.64 KB)
  - Clear DS3 Trouble (TAP-103) (33.8 KB)
  - Isolate and Clear an Ambiguous Failure Condition (TAP-104) (18.18 KB)
- Maintenance and Detailed Level Procedures (1.31 MB)
  - Index of Maintenance and Detailed Level Procedures (DLPs) (33.49 KB)
  - Connect DS3 High-Speed Signal Interface Cables to EdgeLink100 Unit (DLP-500) (23.09 KB)
  - Connect the Equipment Cage to Earth Ground (DLP-501) (24.37 KB)
  - Replace the CCA420 M13 Multiplexer Card (DLP-502) (51.83 KB)
  - Perform Craftport Functions for the EdgeLink100 Multiplexer (DLP-503) (106.33 KB)
  - Circuit Card Removal or Installation (DLP-504) (32.8 KB)
  - Equipping, Unequipping or Disabling Channels or Changing Service State (DLP-505) (25.67 KB)
  - Connect DS1 Low-Speed Signal Interface Cables to EdgeLink100 Unit (DLP-506) (71.31 KB)
  - Set the M13 Multiplexer Card to Factory Defaults (DLP-507) (55.55 KB)
  - Add SNMP Management Capabilities (DLP-508) (31.47 KB)
  - Craft Terminal Installation and Login (DLP-509) (240.09 KB)
  - Install the Cage into a 19- or 23-inch Rack or on the Wall (DLP-510) (237.61 KB)
  - Connect a Power Wiring Harness to the EdgeLink100 Unit (DLP-511) (38.42 KB)
  - Connect the EdgeLink100 to an Ethernet Network (DLP-513) (24.99 KB)
  - Familiarize Yourself with the ACX091 Cage (DLP-514) (106.34 KB)
  - Replace Defective EdgeLink100 Fan Assembly (DLP-515) (10.23 KB)
  - Configure the DS3 Line Buildout for the EdgeLink100 (DLP-516) (12.42 KB)
  - Configure the DS1 Line Code for the EdgeLink100 (DLP-517) (9.63 KB)
  - Configure the DS1 Line Buildouts for the EdgeLink100 (DLP-518) (21.37 KB)
  - Update New System Software for the EdgeLink100 (DLP-520) (83.37 KB)
  - Configure the DS3 Interface for the EdgeLink100 (DLP-521) (10.44 KB)
  - Configure the DS1 Interface for the EdgeLink100 (DLP-522) (14.05 KB)
  - Perform a Telnet/SNMP Session Using PPP Connectivity (DLP-523) (32.11 KB)
  - Perform a Telnet/SNMP Session Over the Ethernet (DLP-524) (53.57 KB)
  - Configure DS1 Auto-Sense for the EdgeLink100 (DLP-525) (18.08 KB)
  - Upgrading New Front Access Fan Assembly (DLP-526) (266.46 KB)
  - Replacing a Side-Mounted Fan Assembly (120.79 KB)
- Configuration and Reference Guides (679.55 KB)
  - Craft Port and Telnet (247.79 KB)
  - Ethernet TCP/IP Communications (60.7 KB)
  - SNMP Theory of Operation (126.64 KB)
  - TL1 Theory of Operation (363.77 KB)
  - Unit Configuration, Plug-In, and Cable Compatibility (79.04 KB)
- General Description (315.5 KB)
- Specifications (50.47 KB)
- EdgeLink100 User Guide (4.07 MB)

3.5
- 3.5 Release Notes (57.01 KB)
- 3.5 Software (1.87 MB)
- 3.5 MIB (6.23 KB)
- 3.5 Download Steps (156.73 KB)

3.4
- 3.4 Release Notes (147.54 KB)
- 3.4 Software (1.69 MB)
- 3.4 MIB (6.23 KB)
- 3.4 Download Steps (215.51 KB)

3.3
- 3.3 Release Notes (60.47 KB)
- 3.3 Software (1.7 MB)
- 3.3 MIB (6.23 KB)
- 3.3 Download Steps (30.36 KB)

3.1
- 3.1 Release Notes (169.78 KB)
- 3.1 Software (1.67 MB)
- 3.1 MIB (6.23 KB)
- 3.1 Download Steps (74.11 KB)

3.2
- 3.2 Release Notes (155.32 KB)
- 3.2 Software (1.69 MB)
- 3.2 MIB (6.23 KB)
- 3.2 Download Steps (30.36 KB)

3.0
- 3.0 Release Notes (17.43 KB)
- 3.0 Software (1018.96 KB)
- 3.0 MIB (6.23 KB)
- 3.0 Download Steps (59.4 KB)

2.4
- 2.4 Release Notes (24.29 KB)
- 2.4 Software (1012 KB)
- 2.4 MIB (6.23 KB)
- 2.4 Download Steps (48.58 KB)

2.1
- 2.1 Release Notes (13.37 KB)
- 2.1 Software (315.89 KB)
- 2.1 MIB (6.23 KB)
- 2.1 Download Steps (48.58 KB)

TFTP Server
- TFTP Server (444.29 KB)